We set a small cookie for sign-in (strictly necessary), two to remember your language and theme when you pick them (strictly necessary, set only at your request), and one for generation deduplication (only with consent). No third-party advertising or tracking cookies. See our Privacy policy for details.
Make a storage box that fits your things. Customize the dimensions, hinge, closure and optional divider grid. The box and lid print flat for assembly, with a two-colour option. For food use, food-safe PLA is advised, plus a food-safe liner; filament alone does not make prints food-safe.
Outer width of the box, side to side. The hinge runs along this edge at the back.
Outer depth of the box, front to back. The hinge barrels add about 6 mm behind this.
Outer height with the lid closed.
snap = the lid clicks straight onto the hinge pin (no extra parts, and it can be popped off again); pin = a separate printed pin slides through the hinge barrels for a more secure, permanent hinge.
How the lid stays shut: snap = a click-shut tab on the front you open with a thumb; magnets = facing pockets for 6 x 2 mm disc magnets (glue them in — magnets not included); none = a plain friction-fit lid with a finger notch.
Compartment columns inside, divided across the width (1 = no divider).
Compartment rows inside, divided front to back (1 = no divider).
Tolerance preset for how the printed parts mate. standard suits most printers; snug gives a tighter lid and hinge on a well-calibrated machine; loose adds clearance if the lid or hinge binds.
