We set a small cookie for sign-in (strictly necessary), one to remember your language when you pick one (strictly necessary, set only at your request), and one for generation deduplication (only with consent). No third-party advertising or tracking cookies. See our Privacy policy for details.
A vertical stand for the PlayStation 5 Slim (disc or digital) and PlayStation 5 Pro that you shape yourself: pick a ring around the console and set how wide it is, or swap the ring for four feet spreading out to the sides, and inlay your name or gamer ID into the base. The console sits on a cradle that follows its underside and is located by a boss in the stand-screw recess (pop out the little cap and park it in the stand); an M3 screw or the Sony thumbscrew from below locks it rigid. The console's bottom vents stay open. One printed part plus the two-colour name inlay, no supports, PETG recommended.
Which console the stand is for. PS5 Slim covers both the disc and the digital edition. The cradle and screw position are shared by both models; the PS5 Pro variant adds relief for the Pro's second underside vent grille.
The footprint around the cradle: a circular ring (set its diameter below) or four feet spreading out to the sides (set their reach below).
Outer diameter of the ring (ring style only). 155 mm is the size of Sony's own stand; wider rings are steadier and show more of the name. 235 mm is the most a 256 mm bed can carry.
How far each foot reaches sideways from the centre of the stand (feet style only). Longer feet are steadier and leave more room for the name; 120 mm is the most a 256 mm bed can carry.
Name or gamer ID inlaid flush into the top of the base — curved along the front-right of the ring, or along the front-right foot, always beside the console where it can be seen. Up to 12 characters; clear it for no name. A long name on a small base shrinks to fit and may be refused: use a bigger ring or longer feet.
