We set a small cookie for sign-in (strictly necessary), one to remember your language when you pick one (strictly necessary, set only at your request), and one for generation deduplication (only with consent). No third-party advertising or tracking cookies. See our Privacy policy for details.
A configurable countertop or tailgate caddy with one to six open utensil bins. Set the bin dimensions, choose editable engraved labels, and add either a scalloped cup dispenser or a full-size paper-towel platform with a fused vertical pole. The towel holder reserves a configurable 140-220 mm roll envelope behind the bins, with a conservative 180 mm default for thick warehouse-club rolls.
Number of equal-sized utensil bins. Labels 1 through this number are used.
Name engraved on the first bin when labels are enabled. Leave blank for no name on this bin.
Name engraved on the second bin when present.
Name engraved on the third bin when present.
Name engraved on the fourth bin when present.
Name engraved on the fifth bin when present.
Name engraved on the sixth bin when present.
Engrave each active compartment's name into the front wall.
Clear inside width of every utensil bin. Overall length grows with this value and the bin count.
Clear inside front-to-back depth of every utensil bin.
Overall bin height, including its floor.
Thickness of outer walls and shared dividers. The default is six 0.4 mm extrusion widths.
Floor thickness under the bins and selected accessory.
Optional feature: none, a front-scalloped cup dispenser on one end, or a paper-towel platform and pole behind the bins.
End of the bin row that receives the cup dispenser. Ignored for the other accessory choices.
Clear inside diameter of the cup dispenser. The reference uses 100 mm for large 18 oz cups.
Outside diameter of a new full paper-towel roll. This sizes the support platform and keeps the roll 6 mm away from the bins; 180 mm is a conservative default for thick warehouse-club rolls. Values above 180 mm require a bed deeper than 256 mm with the default bins.
Diameter of the vertical pole inside the roll core.
Pole height measured from the print bed. A tapered 5 mm tip eases loading the roll.
